Pricelist*
P8

Standard equipment |
---|
Hypalon Orca® gaskets.
Hypalon Orca® gaskets.
5083 aluminum certified for naval use with oxidation at 20 μ.
- 100% A4 stainless steel hardware.
Hull in RINA and FSC certified marine plywood in okoumè, mahogany and birch.
Pair of internal/external reversible buoyancy reserves + 8 straps with safety nylon buckles.
Bow eyebolt with through plate and towing line.
Hull wash drain plug at lowest point of keel.
Sacrificial battens in hard wood (mahogany) and tapered to protect the keel.
Structural epoxy waterproofing cycle.
P1 scratch resistant polyacrylic clear finish.
Breathable tubular bag for oars, rudder and sail kit.
Breathable saddlebag for benches and dinghies.
Wheel integrated in the stern skeg.
Benches with slatted design.
CE label laser engraving.
Pair of wooden static retractors for hull opening.
Electric Motor Kit
Electric Motor kit Equipment |
---|
- Marine Electric Motor Riptide Minn Kota – 400 lb – Battery level – Reverse engine – Power regulation
- Lithium LIPOFE4 Battery 50AH High density – Deep cycle – Distance autonomy: 10 km full power, 20 km mid power
- Recharge Smart station LIPOFE4 battery 10A – Time for dull recharge 5 hours
Sailing Kit
Sailing kit Equipment |
---|
- Breathable tubular bag for oars, rudder and sails
Tilting rudder and removable two-tone solid tiller.
Basic mainsail and vang adjustment with low friction circuits.
Straps with frogs.
- Bayonet daggerboard with elastic seal.
19-strand 3mm stainless steel rigging.
Dyneema® halyards and matt sheets.
RWO®-Viadana®-Holt®-Camcleat® component equipment.
Sails in white Bainbridge® fabric.
Mainsail with 1 full batten + 2 half battens.
Bow with carbon-reinforced transparent window.
Portuguese sloop rig with progressively flexing mast/peak.
Praddle Paddle
Sail Fabric
As an alternative to the white Bainbridge fabric, you can order your P8 with the premium brick-colored Tanbark fabric from Challenge Sailcloth.
TNP Oars
Technical upgrade of the oars provided. 30 mm Dural, 240 cm long, carbon oarlock, 12 mm A4 stainless steel pin, brass oarlock. Rugged and powerful, TNP oars are ideal for covering many miles rowing alone or in pairs. Weight 2700g. Peso 2700 g.
Standard Oars
Teak Benches
Slatted Teak Benches – Add a touch of exclusive sophistication and understated elegance to your P8.
Laser Engraving
We can personalize your P8 by laser engraving the name or design of your choice. Engraving 28 x 12 cm.
Optional – Trolley |
---|
Standard wheels travel trolley

Beach wheels travel trolley
Same of standard one, but with beach whells.
Bicycle Trailer hitch
Bicycle trailer hitch with hook. It will allow you to tow the P8 with the bike. Compatible with the Travel Cart.
Standard wheels Magnum launch trolley
The launch trolley for the P8. Dismountable, it consists of aluminum rudders and an elegant wooden frame. Convenient for launches and haulage, especially on slipways with pebbles and rocks. It only works with the open boat.
Beach wheels Magnum launch trolley
Optional – Utility |
---|
Carrying bag
Canopy

Engine support

50N Jacket
EN ISO-12402-5 buoyancy aid jackets. Thrust 50 Newtons.
Optional – Sailing |
---|
Junior Pack
Toe clip straps and rudder stick. Superfluous when using the tubular buoyancy aids outdoors, useful when used indoors for lighter crews or solo outings.
Racer Pack

Small terraces
Wind vane
Wind vane fixed in the rigid part of the head of the mainsail. Little Hawk Race Podium Edition model, sensitive and light, perfect for detecting every breath of wind on board your P8.
Sailing Ugrade |
---|
Carbon Mast
As an alternative to the classic wooden mast, a lightweight, high-performance carbon mast is available.
Sail fabric

TNP oars
Technical upgrade of the oars provided. 30 mm Dural, length 240 cm, carbon rowlock, 12 mm A4 stainless steel pin, brass rowlock. Robust and powerful, the TNP oars are ideal for covering many miles rowing alone or in pairs. Weight 2700 g.
Laser engraving
Possiamo personalizzare il tuo P8 incidendo con il laser il nome o il disegno che preferisci. Incisione cm 28 x 12.
Teak Benches
Panche in teak con disegno a doghe – Aggiungi un tocco di esclusiva raffinatezza e sobria eleganza al tuo P8
Optional – Comfort |
---|
Ladder
3-step swim ladder, foldable, with quick coupling. It mounts on the transom.
Awning
Sun awning, foldable. It is mounted using the pre-drilled holes on the side benches. It cannot be used for sailing, only for motor/oar trips.
Small mat
Contoured non-slip rubber mat. Suitable if the boat is used as a tender, diver, fire brigade, etc… because it allows objects such as anchors, cylinders and various tools to be stored on the bottom of the hull without scratching the bottom of the hull.
Optional – Management aids |
---|
Cockpit eyebolt for suspended
Stainless steel eyebolt on plate fixed with 4 through pins on the keel, it is a useful point of strength for boat lifting, stowage or other utilities.
Roll on suction cups
This accessory is fixed to the rear window of the car and is used to load or unload the hull from the roof rack by yourself and with little effort. It is fixed at the moment of the operation and is easily released immediately afterwards.
Dynamic retractor
The supplied static wooden spreaders allow easy partial opening of the hull. This device makes the execution of the second phase of the operation even easier by dilating the hull with little effort in a few seconds until it is completely open.
* The prices indicated in this price list are inclusive of VAT, excluding packing and transport costs.